Sealant

Feature:1. Product has a temperature range to 400°F2. Excellent solvent and chemical resistance3. Makes or dresses gaskets in rigid assemblies4. Eliminates gasket compression set Application:1. Industrial Anaerobic2. Industrial Sealants3. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

Feature:1. Makes flexible gaskets for rigid machined flanges with less than 050" gap2. Flexes with flanges that move in service Application: 1. Industrial Anaerobic2. Industrial Sealants3. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

Feature:1. Forms a flexible, solvent-resistant seal that will not tear or decay2. Seals to 300°F and fills gaps to 0.050"3. Can be used on flexible metal assemblies, including aluminum surfaces4. Easy disassembly and cleaningGasket Sealant

Feature:1. Product is a medium strength sealant2. Seals close fitting joints between rigid metal faces and flanges3. It is typically used as a form-in-place gasket on rigid flanged connections,e.g. gearbox and engine casings, etc Application:1. Industrial Anaerobic2. Industrial Sealants3. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

Application:1. Industrial Anaerobic2. Industrial Gasketing3. Industrial Sealants4. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

Feature: 1. Product is a highly flexible sealant2. Cures when confined in the absence of air between close-fitting metal surfaces3. It is designed for use on rigid metal flanged connections4. Particularly where minor oil contamination of the flange surfaces can occur5. Suitable for use on aluminium substrates where very good adhesion is needed6. It ensures an instant, low-pressure seal7. For sealing rigid flange faces on transmissions and engine casings Application:1. Industrial Anaerobic2. Industrial Sealants3. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

LOCTITE 5203 for machined, rigid metal flanges - easy dissassemblyTechnical Data:1. Colour: Red2.. Service temperature range: -55°C - +150°C3. Tensile shear strength: 1N/mm²4. Max. gap: 0.125mm5. Fixture time steel: 10 min.6. Fixture time aluminium: 20 min.7. Strength: Very low8. Cure method: Anaerobic9. Pack sizes: 50ml, 300ml Application :1. Gasketing2. Industrial Anaerobic3. Industrial Sealants4. Rigid Flange (Anaerobic and Polyacrylate)Gasket Sealant

LOCTITE 5205 for machined, rigid metal flanges - semi flexibleTechnical Data :1. Colour: Red2. Service temperature range: -55°C - +150°C3. Tensile shear strength: 3N/mm²4. Max. gap: 0.25mm5. Fixture time steel: 25 min.6. Fixture time aluminium: 25 min.7. Strength: Medium8. Cure method: Anaerobic9. Pack sizes: 50ml, 300ml Application :1. Industrial Anaerobic2. Industrial SealantsGasket Sealant

Feature: 1. Product is a flexible silicone sealant2. Cures on exposure to moisture in the air to form a tough rubber gasket3. The product is designed primarily for flange sealing4. Excellent oil resistance or rigid flange sealing for example on transmissions and cast metal housings5. It is tack-free after just 10 min6. The product is water-glycol resistant and can be used on machined or cast surfaces, metal or plastic Technical Data: 1. Colour: Grey2. Max. gap size: 1 mm3. Service temperature range: -55 to + 200°C4. Tensile shear strength in N / mm²: 1,75. Substrate to be sealed: Metals and plastics6. Skin over time: 30 min.7. Cure through volume in 24h [mm]: 2,5 mm Application: 1. Gasket Sealant Dressings2. Industrial Moisture Cure3. Industrial Silicone (Flexible) - RTV4. Non-Rigid Flange (Silicone and Polyacrylate)5. PCB Protection Sealants

LOCTITE SI 5900 thixotropic paste, black, excellent in engine oilsTechnical Data : 1. Colour: Black2. Service temperature range: -55°C - +200°C3. Tensile shear strength: 1.2N/mm²4. Max. gap: 1mm5. Skin over time: 15 min.6. Cure through volume in 24 h: 2.5 mm7. Strength: Low8. Cure method: Moisture (Silicone)9. Pack sizes: 300ml Application :1. Industrial Silicone (Flexible) - RTVGasket Sealant